How to fix Android reboot loop in 6 steps. Android reboot loop can be one of the most frustrating things to happen to your phone, but you shouldn’t just give up on it and toss it away.
Here are some effective ways to fix the issue and get your device up and running again in no time!
What does boot looping mean?
Boot looping is when your Android device continuously reboots, or turns on and off, without ever fully booting up.
This can be caused by a number of things, but most often it’s the result of a corrupt or damaged system file.
Boot looping can be frustrating and seem like a never-ending cycle, but there are a few things you can do to fix it.
With a little patience and some troubleshooting, you can get your Android device up and running again in no time.
Can a Bootloop be fixed?
If your Android phone or tablet is stuck in a boot loop, it can be really frustrating. But don’t worry, there are a few things you can try to fix the problem.
In this post, we’ll go over six steps you can take to try and fix an Android boot loop.
Go to Settings and Reset Your Phone
If your phone is stuck in a reboot loop, the first thing you should try is resetting your phone. This can be done by going to Settings and selecting the option to reset your phone.
If you don’t see this option, you may need to select About phone or System. Once you’ve found the reset option, select it and confirm that you want to reset your phone.
Do a Factory Reset on Your Phone
If your phone is still stuck in a reboot loop after you’ve tried all of the above, it’s time to do a factory reset.
This will wipe all of the data off of your phone, so be sure to back up anything important first. To do a factory reset, go to your phone’s settings and find the Backup & Reset or Reset option.
Tap it, then tap Factory Reset. Confirm that you want to do this, and wait for your phone to finish resetting.
Boot into Recovery Mode
The first step is to boot into Recovery Mode. To do this, you’ll need to press and hold a combination of three buttons on your Android device.
The button combination varies by device, but it’s usually one of the following: volume up + power, volume down + power, or home + power.
Perform a Nandroid Backup
Before you start any of the steps below, it’s important that you create a Nandroid backup. This will allow you to restore your phone to its current state if something goes wrong.
To do this, you’ll need to boot into recovery mode. Once you’re in recovery mode, select the Backup option and wait for the process to finish.
Once you’ve completed a Nandroid backup, connect your phone to your computer and copy over any files you want.
When you’re done, select Wipe data/factory reset (make sure you have backed up any important files before doing so). Press Yes when prompted.
Wipe Cache Partition
If your Android device keeps restarting or rebooting itself, it might have a corrupted system cache. To fix this, you can wipe the cache partition. This will delete the system cache and force your device to create a new one. Here’s how to do it
This can fix a number of issues on your phone or tablet, and it won’t wipe any files from your device. It is best to do before installing a new ROM, though, as that may overwrite parts of your cache.
The process can take several minutes and will vary by device. Note that you may see an SDCard Partition label when you enter recovery mode; select Apply update from ADB or apply update from SD card rather than that option.
You can download ADB from Google’s website and transfer it to your computer or installation media if you don’t already have it.
Then, boot your device into recovery mode. If you’re unsure how to do that, we have a guide for most devices here.
Once you’re there, select wipe cache partition from your recovery menu and press yes on your screen when prompted.
After a few minutes, you’ll see a confirmation screen that tells you that the cache wipe has been successful.
Soft Reset Your Device
Sometimes, the best way to fix a problem is the simplest way. If your Android device is stuck in a reboot loop, the first thing you should try is a soft reset.
This will restart your device and hopefully fix the problem. To soft reset your device, simply hold down the power button for 10-15 seconds.
If this doesn’t work, try taking out the battery (if possible) and then putting it back in and holding down the power button for 10-15 seconds.
Why my phone is rebooting again and again?
There are several reasons why your Android phone might be stuck in a reboot loop. It could be a problem with the power supply, the battery, or a corrupted system file.
If your phone is rebooting itself, it’s probably because it’s not getting enough power. The first thing you should do is make sure that the power supply is plugged in and working properly.
If that doesn’t fix the problem, try removing the battery and putting it back in. If that doesn’t work, you may need to factory reset your phone.
One of your apps could be causing your phone to reboot. To find out which one, boot your phone into safe mode.
If it doesn’t reboot then, an app is probably responsible. To do that, press and hold down on Power for five seconds or until you see a prompt asking if you want to reboot into safe mode.
Tap OK. Your phone will boot up, but without any third-party apps enabled. After 30 minutes (or less), turn off safe mode by pressing and holding Power for five seconds or until you see a prompt asking if you want to reboot.
How do you fix a crashed Android phone?
If your Android phone keeps restarting or crashing, you might be able to fix it by following these six steps.
- Check for a software update.
- Restart your phone in Safe Mode.
- Uninstall recently-installed apps.
- Clear your phone’s cache partition.
- Perform a factory reset.
- Contact your carrier or manufacturer for help
Before you try these steps, it’s worth pointing out that many common issues can be fixed by simply restarting your phone.